1 / 11
Staff Of Sliske - RuneScape — image 1
1 / 11

Staff Of Sliske - RuneScape

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is the Staff of Sliske from RuneScape. I've designed this to be printable as a cosplay item, scaled to 60 inches…

Rating
0 / 5
Likes
5
Downloads
30
Makes
0
Views
396
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution

This is the Staff of Sliske from RuneScape. I've designed this to be printable as a cosplay item, scaled to 60 inches total length (5 feet). The model has been sliced into 5 total pieces with interlocking connections on each end.

EDIT: Moved the connections to the other end of the parts. This makes them printable in their current orientation; no rotating necessary. It also solves a clearance issue where one part had protruding connectors on each end and could not fit into a 450mm high build volume.. it fits now. ALSO, I will be attempting to print this soon, so please check back in when it's done for final files / print information.

Final Edit: This model has been printed! Pictures have been added above.

In order to print this model you will need:

  • A printer larger than an Ender 3, or a program to slice the model.
  • Approximately 2.5 - 3 rolls of filament, depending on settings.
  • Hot glue or Epoxy to assemble the parts. In my testing, hot glue was more than enough to weld PLA together.

Fair warning: If you attempt to scale this model it WILL alter the fit of the parts and the tolerances may be too tight or loose to fit properly. I've given the connections a gap of 0.6mm between the walls of each part to allow them to fit together easily and leave just a bit of space for glue. Scaling the model will make this gap smaller or larger, depending on which way you go.

Print Settings

Rafts:

No

Supports:

Yes

Infill:

Varies by part

Filament:

Any PLA

Any (grey recommended)


Notes:

This model has been printed and fits together as expected.

Category: 3D Printing

Tags