1 / 4
JB Weld Clear Weld, tubes, mixers, and dish holder. Gridfinity 1x3
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity station that hold 4oz JB Weld clear, 2 Tubes, mixers, and a dish.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 82
- Wydruki
- 1
- Wyświetlenia
- 537
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (37)Powiązane
1x3 Gridfinity storage for 2 JB Weld 4oz bottles, 2 1oz tubes, 2 types to stirrers, and an epoxy dish. I recommend using masking tape to cover the dish so you dont have to keep reprinting them.
Pictured are the stackable mixers found here and the thin stick are just the bit of filament priming from the start of prints. They are useful for mixing up small amount of epoxy and dabbing in small areas.
Created with OnShape, edit here.