Liczymy pasujące modele…
This project is basically a laser engraver frame designed to work with leftover TAZ 3d printer pieces and whatever stuff I had laying around. It should be pretty easy to adapt to whatever size or bearing setup you would like to use. The…
A basic remix of the classic benchy boat model with recycling themed branding and imagery.
Recently I broke our ceramic soap dispenser from IKEA, and just as I wanted to throw it into the trash, I noticed that the thread on the dispenser mechanism is quite simple and should be easy to recreate in CAD :) After a late night…
Español: Este proyecto es una solución ecológica para reutilizar los laterales de cartón de los carretes de filamento vacíos, convirtiéndolos en cajas de almacenamiento funcionales y apilables. El diseño está estandarizado bajo las…
This is a storage box that uses old election or advertising signs made of corrugated plastic (coroplast). Each box uses one 18x24 inch sign (457mm x 609mm x 4mm) and two of the metal sign brackets. The sign brackets are cut down into 18…
A Push Fit Recycled Bottle stabilising Base. This should fit any recycled plastic bottle of 65mm in Diameter I had issues with my bottle top pencil sharpener falling over every time I accidentally moved it with my hand or arm. This will…
Español: Este proyecto es una solución ecológica para reutilizar los laterales de cartón de los carretes de filamento vacíos, convirtiéndolos en cajas de almacenamiento funcionales y apilables. El diseño está estandarizado bajo las…
Give your empty filament spools a second life with this simple and clever cat toy. The concept: Two clip-on discs attach to each side of the spool, trapping a ball inside. Once assembled, the ball spins freely within the structure,…
Turn your old plastic bags into a fun parachute for this paratrooper soldier! The model creates an entertaining outdoor toy for kids. , it requires supports for optimal results. For best durability, print with 45%–55% infill using PLA or…
The holder is for 801640 fake batteries with ~420mA, the original 801640 do not fit!!! https://www.printables.com/de/model/423934-battery-pack-for-recycled-13300-akkus
Simple design that lets me reuse the spindle from overture cardboard spools for storage tubs.
I had a bunch of Noosa Yogurt cups that I felt could be reused, rather than recycled, so I made/printed this to turn them into drawers (as seen in the 2nd picture). I think that the model could be scaled up or down to match other small…
The original battery (500mah) didnt last long under normal operations, let alone with the DVR mod. So I upgraded! I salvaged some LiPo cells out of an old laptop (3x 1800mah were usable). Soldered on a male plug ends on each. Removed old…
This easy-to-print design transforms unwanted discs into handy mini shelves perfect for storing Legos, action figures, and other small items. Ideal for anyone interested in home improvement or looking to declutter in style, these little…
I love @jake_social 's idea of recycling the cardboard from the empty Prusament spools and making storage boxes out of them! Only the design didn't seem quite complete to me. So I made a few small changes : I transferred the design from…
I have already created a remix of the Prusa.Box ( see here ), which served as the basis for this pen holder. The lid and lettering were adjusted accordingly. The screw lid gave way to a lid with a hole, so that the box can now also…
This jar lid holder is for organizing canning lids or lids from recycled jars, such as those from peanut butter or pasta sauce. The holder has a hexagonal lattice base, which prevents water accumulation by allowing moisture to drain if…
Inspired by imakina's nice Prusament connector design, I’ve got an idea to use it for side panel of my Ikea LACK enclosure, the compartment underneath the printer. This wall has total 426mm of height, it is intended to use together with…
Discord to exchange knowledge and ideas as we keep improving IFast — https://discord.gg/VRfdQc8PVQ — (old link *** https://discord.gg/MQXRUpbvqW *** ) After conversion to Klipper I took the chamber heater to make a Filament dryer. added…
A recycled tube thread box is a versatile and eco-friendly idea for repurposing used packaging. Its applications are almost limitless, and the benefits of using it are both ecological and economical. Inner diameter ~ 76mm
A compact and practical wind turbine designed for STEM projects, this model is easy to build using 3D-printed parts and recycled materials like a DC motor, bottles, and a broomstick. It does not include energy storage or electronic…
This project is inspired from XYZAidan project. XYZAidan profile : XYZAidan Original project "Recycled Cardboard Molding" : Recycled Cardboard Molding How to print this ? 20% infill seems to be OK. To print a little bit faster you can…
♻ Turn a Pop Can into a Paint Station! Perfect for miniature painters, canvas artists, or casual hobbyists — this 3D-printed modular system transforms a standard aluminum can into a compact water pot and brush stand. Use Chompie or Nosh…
We melt 3D printing scraps down into fidget spinners out on our deck using this silicone rubber mold that I designed. Here's the mold to make the mold, and all the other pieces (except the bearing) to make a spinner. We use an old toaster…
Problem: Small marks are left on the backside of a laser cutted part when you cut materials directly on the metal honeycomb of a laser cutter. This problem called ‘flashback’ is especially visible on acrylic. A simple solution is to lift…
This is bassically a version for the 18450 battery
Are you tired of tossing your printouts when you know the backside is still usable? If you said yes, then turn those sheets into note paper. Take a sheet of 8.5" x 11" and cut it into four equal pieces and place them into this holder and…
Inspired by the “Recycled Cardboard Molding” project I found on Thingiverse. I wanted to try and make sound absorption panels using recycled materials. - I took an existing (sine wave) press and removed the pattern and then created a…
Per aste da 10mm di Diametro, Spessore pareti: 4 layer Materiale: PETG o superiori Se i fori dovessero essere stretti con alcune Aste, passare una punta da 10mm con l'avvitatore taglia le 4 aste a misura 1 lunghezza totale 3 lunghezza…
A practical model for pressing all sizes of cans. Useful if you want to throw away the cans and save some space in the bin. In many countries, there are collection bins for aluminum waste. Beware, in some countries, it is not advisable to…
This is a scuba diver costume for kids from 2 to 5 years old. You will need two PET bottles (milk, water or similar) for the air tanks. I also used some old harness parts and buckles form an old bag and coarrugated tube. A diver computer…
This mini rocket has been made with a recycled mini PET bottle as main body. Additional 1xNose Cone, 3xFins, 6xWindows and 1xExhaust are printed in about 1 h and glued all together. Print instructions I have printed in generic red PLA.…
A very simple floating candle holder made with the top part of a PET bottle. Available in two heights and with hearts as a decoration on the base (the one without it in the photo). Cut the bottle at the height you prefer, do not remove…
I didn't want to just throw out the nice Pusament spool holders once they were finished so I designed this floating holder that accepts one end of the spool to create a nice aesthetic way to hold full rolls of new rolls and have them…
Give your empty filament spools a second life with this simple and clever cat toy. The concept: Two clip-on discs attach to each side of the spool, trapping a ball inside. Once assembled, the ball spins freely within the structure,…
Turn your old plastic bags into a fun parachute for this paratrooper soldier! The model creates an entertaining outdoor toy for kids. , it requires supports for optimal results. For best durability, print with 45%–55% infill using PLA or…
New shoes for Ikea Molger using old wheels. Tested with Wood filament. It is basically a simple adapter. No supports needed. Printed with 15% Infill, 0.4 nozzle and 0.2mm height. Modeled directly in FreeCad with fixed values, could be…
Print the model with normal PLA settings, then pour the silicone of higher shore rating into your printed mould. Wait until it cures. Place the ground PLA into the newly made silicone mould and melt the plastic into the form with the…
This is a remix of the wonderful work of fatdavemakes. I tried to make it watertight adding the lip that is present in commercial bottles. It seems to work fine with CocaCola lids, but test your fit. Your mileage might vary. Gcode is for…
Make a snap cap from a recycle 12 gauge brass base. Works for low and high brass. You will need remove the primer. Use E6000 or equivalent adhesive to premanently attach to base. Print Settings Printer: Voxelab Aquila Rafts: No Supports:…
If you've got an eye for quality, you've probably dropped some serious coin on the best toothbrushes money can buy - Oral-B's Pulsar toothbrushes. The bristles vibrate and scrub your teeth clean - but once the bristles begin to fray, it's…
Set for sewing AntiCovid face mask or just for having fun. The main idea was to recycle - or better said - not to waste the prusament spool. The set has many possibilities of use - it depends of how many parts you print. You can also use…
Create smaller spools for filament storage from your old Prusa spools. Screw together, strong with 29mm through-hole.
This started as an experiment to see what I could do with an old motor from a hard drive. I had a bunch of loose motors left over from harvesting the magnets from them. So I picked one of the motors that seemed to be the fastest, and…
To make this powerbank I used 4 recycled Elf Bar batteries and a powerbank module T6845-C (not the best module but it works) Extra materials: 8x Hex Screw M3X8 Dimension: 5.7x5.7xh4.2cm
Take the sides off your used Overture spools and recycle!
Old hay twin (String) from the farm off hay bales after feeding the animals. I use some of my old emptied filament spoil holders and use them to roll up, to use later for the garden or outside. (I come form a Farm here in Canada and it is…
Battery Pack for Recycled - 13300 from disposable E-Cigarettes. https://www.printables.com/de/model/1008015-battery-pack-for-recycled-801640-fake-akkus
This is actually the first thing I printed in Prusament recycled PETG, still using a broomstick as Spoolholder as the filament spool did not fit my original creality spoolholder. It holds up nicely for 2 months now so I am confidently…
This is a keychain, You might sell this on etsy* with like a product ot show it is 100% recycled. This could help people feel more attached to the product. Using recycled filament could be another selling point for your product. Print in…
PROJECT PRESENTATION I recently collected a new plant, but I couldn't find where to put it in my apartment. So I made this little design to transform an 850ml can (European dimensions Ø99mm) into a hanging pot. You will need the following…
Having tried many different empty spool based storage systems and creating a couple of varieties myself, I kept coming back to the same conclusions... I didnt want to drill new holes in the spool, i didnt want to faff with lining up…
Hay dos modelos aparte de reloj , es un joyero o una hucha . Yo lo imprimí con PLA altura de 0.2mm ,5% de relleno y con soportes. Espero que os guste. There are two models apart from watch, it is a jewelry box or a piggy bank. I printed…
CNC Kitchen inspired me with this video to use recycled foam as dampening material for my MK3. Instead of using big slabs I decided to incorporate them in feet connected to the printer. I made the feet in two parts for easier printing. I…
Simple easy print storage boxes, print great on 0.4mm nozzles. Made in openscad and fully customizable(comments in code). Use recycled pop bottle lids to reduce waste(a printable lid is included in case needed). This have a very good seal…
Recreator3D.com brought these as our swag giveaway coin keychain for ERRF2023 (now officially 3DPrintopia!) to help promote our Recycling efforts. They'll also be at SMRFF2023 at our sponsored table at the event in December 2023! Come by…
Insert a cork mid print. Pause or set a colour change just before the internal fillet (around layer 253 at 0.2 mm layer height). The internal void will accommodate a cork of up to 34 mm diameter x 47.5 mm height - that is larger than the…
Recycling the tins from your canned tomatoes to grow new tomatoes is a great way to reduce your impact on the environment and let's not kid ourselves: Homegrown always tastes better. This print-in-place lid for the standard sized food…
I only made the coupler, get the original HERE and HERE I have a LOT of these so I need to use them up on stuff like this.
Power bank with recycled material and SD holder Powerbank realizados con material reciclado a partir de celdas de batería de viejos laptop y cajas vacías de pastillas SMINT, empleando una placa de gestión de carga de bajo coste:…
All our fresh fish is packaged in the same plastic tray, so I am using them for my propagation stations. Changed the top to have 20 holes and scaled the cup down to fit. Have included the Fusion 360 file. It has a guide I printed so I…
Turntable with recycled Prusament spool Design by R_vdk Application / Functions A turntable you can use to work on smaller or medium sized parts or items. Uses a prusament spool and 1 standard bearing(625 2Z, included in a Prusa Mini+…
Some say necessity is the mother of invention... Well, here there was only necessity because nothing got invented. :) The need arose when old clothespins' springs started breaking, but the metal clip was still perfectly usable. So,…
Simple lamp with few pla (onli PETG for the light part. Strip 12v (external transformer) led
Playing with Instax photograpy gives some questions: -how to display this nice photo of my dog ? -what to do with other photos? -what to do with spent cartridge, looks almost like a photo frame My proposal is to recycle the empty…
Lessons learned: Please open all windows and ventilate well if melting PLA at home. It is recommended to melt it outside. Melted PLA is hot and can burn your fingers. Do not use a good pot for the melting process, rather an old one…
This project is one of the ten finalists of Hackaday's challenge reuse recycle revamp : https://hackaday.com/2022/06/28/2022-hackaday-prize-reuse-recycle-revamp-finalists/ full details are given here :…
I love the knurled design of the @Tim Bossuyt model but the lid threads didn't work for me. The lid threads on the @jake_social model were glorifyingly fantastic! So I took what I liked from both and combined them for this model, a…
Storagebox / Piggy Bank recycled from Prusa Spool
This is our self-watering pot for you - in typical Prusa-style and printed from PLA Recycled . The flower pot is ideal to grow seeds and herbs beneficial to your health, or you can use it as a small pot for your home flowers. You will…
Turn your old beer caps into something useful with this recycled beer cap coaster! This eco-friendly coaster is designed to hold your favorite bottle caps, giving them a new life as a unique and functional drink accessory. Perfect for…
Pet doesn't like to be swaddled so this spool can be left on the table without being afraid of the spool ending up screw
