ReFrame - spent Instax mini cartridge recycled into photo frame and storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my idea of recycling/upcycling spent Instax mini cartridge into nice photo frame, which also doubles as storage
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 689
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Playing with Instax photograpy gives some questions:
-how to display this nice photo of my dog ?
-what to do with other photos?
-what to do with spent cartridge, looks almost like a photo frame
My proposal is to recycle the empty cartridge into photo frame which has place for several other photos for swapping.
The ‘frame’ part is all that is neccessary to turn the cartridge into a photo frame, it snap-fits onto the cartridge. Photo can slide between the frame and cartridge trough bottom slit, and wedges itself in place in correct position.
The optional ‘backlid’ part gives additional protection to photos placed inside the cartridge, and place for your thumb to sweep them out of it. It snap-fits with greater force, as it shoudnt be removed. In order to store your photos inside the cartridge, you should pry open and bend a little the black foil on the base of the cartridge (last photo), then insert the photo into the slit. In order to take them back, you should press with your index finger the ‘do not press’ plate :) at the frame-side of the cartridge, and use your thumb to slide out the photo.
I test-printed both parts from PLA an PETG, both works fine, but I think these thin parts benefit from increased rigidity of the PLA.
Material cost and printing time are both little.