1 / 3
Pop Art Station – Recycled Can Paint Water & Brush Holder — zdjęcie 1
1 / 3

Pop Art Station – Recycled Can Paint Water & Brush Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Turn a can into a paint water cup with a drip tray and brush holder using this upcycle kit!

Ocena
0 / 5
Polubienia
17
Pobrania
35
Wydruki
0
Wyświetlenia
213
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

♻ Turn a Pop Can into a Paint Station!

Perfect for miniature painters, canvas artists, or casual hobbyists — this 3D-printed modular system transforms a standard aluminum can into a compact water pot and brush stand. Use Chompie or Nosh to cut your can, then attach the printed parts!

🧩 What’s Included

Pop Art Station Top – Holds your brushes upright

Pop Art Station Bottom – Slides over the bottom to catch drips and tip-overs

 

Designed for use with standard 12oz or 16oz cans

 

🛠 Assembly Instructions

Uses: Chompie & Nosh – The Can Cutters

🪓 Use Chompie (for top cut) or Nosh (for bottom cut) to cleanly remove your can’s lid and/or base

🧼 Smooth the metal edge with the Bell + Tuning Plate (or fine sandpaper)

🧴 Apply glue or pressure-fit the Pop Art Station Top Brush Holder onto the can

🛑 Place the Pop Art Station Bottom Drip Tray on the underside

🖌 Fill with water, slide in your brushes, and get to work!

Tagi