Roller Blinds - Attachments and wall mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Roller Blinds Replacement Parts
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 307
- Wydruki
- 1
- Wyświetlenia
- 1549
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Roller Blinds Replacement Parts for both sides of your window blinds. These are used mostly in Australia and original blinds were purchased at Spotlight.
In this Thing is both side of the holder, the mechanical switch to roll up/down blinds and the blind clip to secure the roller blind pole into place.
I've also included the Fusion 360 files in case others want to improve, remix it easier than editing a mesh. All sketches and components included.
Printing Recommendations
I recommend printing this in PET G or ABS as it needs to bare some weight and increase walls and infill for the parts which attach to the wall.
For the Ratchet, print at 100% infill otherwise the chain could come lose and break the housing (if printed in PLA)