5015 fan mount/duct for Anycubic Kobra
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
What it says on the tin.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 209
- Wydruki
- 2
- Wyświetlenia
- 2512
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
UPDATE 9-29-2022: Another Kobra user pointed me to this SKU: MF50152VX-1L02C-A99 I purchased this fan and verified it spins all the way down to 1%, so I highly recommend this one! I have also uploaded a v2 of my design!
UPDATE 10-01-2022: Uploaded v2 alternate featuring slightly thicker ducting which may print better in some configurations.
I found the stock 4010 blower inadequate and 4015 blowers are quite rare, and yet 4020s are just too big; so I decided to put my effort into making the more popular 5015 work. I had to reverse the wires on my WINSINN blowers for it function at all, so check your wiring. However, in my testing most 5015 fans only work above 97% speed for some reason
I have an alternate model with adjusted ducting. In my testing it did not perform appreciably different.
In my testing this worked excellently and its pretty easy to install. Really happy with my results so far. Might begin work on a dual blower setup next. We'll see.
It prints very well without supports if you slice as shown.
Please feel free to iterate on my design. I'm sure the ducting could be improved. My main focus was making something that worked well and could print easily.