Rocket using Cardboard Tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These 3D printed parts are used with a cardboard 3" printing paper tube to make a rocket.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 835
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
I used a 3" diameter cardboard tube from a large format printer paper reel to make a rocket. There are five STL files attached that are needed to make this rocket in addition to a cardboard tube. The parts are press fit together but also get glued to stay in place. I used a regular little tube of Krazy glue for assembly.
STL Files
Bottom Fin
(4)-Bottom Fins needed/Rocket
Connected the “Bottom Body” using the “Fin Pins” and Glue
Nose Cone
(1)-Needed/Rocket
Goes on top and probably needs supports for printing. See picture.
Bottom Body
(1)-Needed/Rocket
Has holes to accept the (3)-Nozzles on the bottom and 8 holes to accept “Fin Pins” to attach the 4 fins. May need supports on the bottom for the nozzle holes.
Fin Pins
(8)-Needed/Rocket
Press/Glue into fins and bottom body. May need brimming for better support, these are small.
Nozzle
(3)-Needed/Rocket
Press/Glue into the bottom of body. May need supports to print.