Peristaltic Pump Controller Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple holder for a 5x7cm prototyping PCB with holes for a potentiometer and a LED. For the pump I used the…
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 1385
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a simple holder for a5x7cm prototyping PCB with holes for a potentiometer and a LED. For the pump I used the design of silisand (https://www.thingiverse.com/thing:1134817).
The schematics of my circuit can be found in the images above.
I also included the software (.ino) for the Arduino MCU and thef3d file so that everyone can customize the design to their needs.
Parts
- Nema 17 Stepper - https://bit.ly/2UZBT9T
- Arduino Nano - https://bit.ly/2UZC4C5
- DRV8825 - https://bit.ly/2PzryeR
- Buck Converter LM2596 - https://bit.ly/2vq9pqU
- Buzzer - https://bit.ly/2J4UWc1
- Capacitor 100uF - https://bit.ly/2GMEpaW
- Touch Sensor - https://bit.ly/2UIhl0P
- Potentiometer 10k - https://bit.ly/2UL9xLC
- Green LED - https://bit.ly/2Vvo7eP
- PCB Terminal - https://bit.ly/2Px02P9
- Prototype PCB 5x7cm - https://bit.ly/2Vvol5F
Cost
- Nema 17 - 8.99
- Arduino Nano - 1.99
- DRV8825 - 0.95
- Buck Converter - 0.38
- Buzzer - 0.19
- Capacitor - 0.08
- TTP223 - 0.09
- Potentiometer - 0.40
- Green LED - 0.01
- PCB Terminals - 0.12
- Prototype PCB - 0.14
- Diverse Screws and PCB Headers - approx. 0.50
- 3D Printed Parts - approx. 2.50
*Total - $16.00
Print Settings
Printer Brand:
Creality
Printer:
Ender 2
Rafts:
No
Supports:
No
Filament: Das Filament PETG
Category: Other