Battery case for Olympus OMD cameras
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Battery case for Olympus / OM Systems OMD batteries BLX-1, BLH-1, BLS-1, BLS-5/50.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 638
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
Battery case (and double-battery pack) for Olympus / OM Systems batteries BLX-1, BLH-1, BLS-1, BLS-5/50. One or other suits most OMD micro four thirds cameras.
Includes one assembly with dual case (side-by-side) for BLH-1, just because that is what I use and it is convenient to carry two spare batteries.
The case design includes a circle cutout battery indicator hole. Just put a coloured sticker on the battery and flip the battery direction to show charged/not-charged.
All models include retaining tabs so the battery does not fall out.
For 3D printing, consider clearance value. I found that for fine-quality printing at 0.2mm layer height, the standard 0.5mm clearance is fine. If you use an extra-fast profile that tends to use wider lines, this might be a bit tight. The original onshape project is configurable to adjust to a wider clearance for faster prints -- consider 0.8mm. The onshape project also has some other battery options, such as LI-90B.