Battery case for Olympus OMD cameras
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Battery case for Olympus / OM Systems OMD batteries BLX-1, BLH-1, BLS-1, BLS-5/50.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 88
- Makes
- 0
- Views
- 638
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
Battery case (and double-battery pack) for Olympus / OM Systems batteries BLX-1, BLH-1, BLS-1, BLS-5/50. One or other suits most OMD micro four thirds cameras.
Includes one assembly with dual case (side-by-side) for BLH-1, just because that is what I use and it is convenient to carry two spare batteries.
The case design includes a circle cutout battery indicator hole. Just put a coloured sticker on the battery and flip the battery direction to show charged/not-charged.
All models include retaining tabs so the battery does not fall out.
For 3D printing, consider clearance value. I found that for fine-quality printing at 0.2mm layer height, the standard 0.5mm clearance is fine. If you use an extra-fast profile that tends to use wider lines, this might be a bit tight. The original onshape project is configurable to adjust to a wider clearance for faster prints -- consider 0.8mm. The onshape project also has some other battery options, such as LI-90B.