Raspberry Pico + USB A Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted to have a case that would fit a Raspberry Pico as well as a male micro usb to male usb a adaptor (like this…
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 377
- Wydruki
- 1
- Wyświetlenia
- 3474
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Wanted to have a case that would fit a Raspberry Pico as well as a male micro usb to male usb a adaptor (like this one: https://thepihut.com/products/raspberry-pi-power-port-micro-usb-adapter), effectivly acting like a memory stick.
small button can be 3d printed as well so that you can access the button on the pico without having to dissasemble everything.
You can also remove the usb adaptor without dissasembling anything by just removing it from the end of the case, friction of the micro usb from the pico to the adaptor should be able to hold it in place when you don't want the adaptor removed.
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
No
Supports:
No
Category: Electronics