1 / 2
Armattan Marmotte mount: Gopro Session + TBS ND filter — zdjęcie 1
1 / 2

Armattan Marmotte mount: Gopro Session + TBS ND filter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

INFO: A mount for a gopro session and TBS ND filters for the marmotte frame. My design goals: +No loose parts.

Ocena
0 / 5
Polubienia
1
Pobrania
48
Wydruki
0
Wyświetlenia
508
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

INFO:
A mount for a gopro session and TBS ND filters for the marmotte frame.

My design goals:
+No loose parts.
+No straps.
+Secure camera and filter.

This resulted in the back-loaded design. First pop in your filter, then the camera. Nothing will fly off in a crash, especially with a battery mounted. Although make sure the camera hasn't slid back after a crash. Because I needed room for the filters the mount can be visible if the camera slides back too far (2-3 mm).

NOTE:
Due to the design, fitting the camera can be challenging on higher uptilts. I run approx. 30 degrees and have no trouble.

CHANGELOG:
V2:
Oldest functional version.
V3:
Cutouts in the corners to reduce sensitivity regarding the camera moving backwards. Moved the entire mount slightly forward on the frame to ease camera fitting.

Print instructions

Print with the front down.

Printed with SainSmart TPU.

Tagi