Armattan Marmotte mount: Gopro Session + TBS ND filter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
INFO: A mount for a gopro session and TBS ND filters for the marmotte frame. My design goals: +No loose parts.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 48
- Makes
- 0
- Views
- 508
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
INFO:
A mount for a gopro session and TBS ND filters for the marmotte frame.
My design goals:
+No loose parts.
+No straps.
+Secure camera and filter.
This resulted in the back-loaded design. First pop in your filter, then the camera. Nothing will fly off in a crash, especially with a battery mounted. Although make sure the camera hasn't slid back after a crash. Because I needed room for the filters the mount can be visible if the camera slides back too far (2-3 mm).
NOTE:
Due to the design, fitting the camera can be challenging on higher uptilts. I run approx. 30 degrees and have no trouble.
CHANGELOG:
V2:
Oldest functional version.
V3:
Cutouts in the corners to reduce sensitivity regarding the camera moving backwards. Moved the entire mount slightly forward on the frame to ease camera fitting.
Print instructions
Print with the front down.
Printed with SainSmart TPU.