1 / 8
Magnetic Door Latch for IKEA HEJNE Printer Enclosure — zdjęcie 1
1 / 8

Magnetic Door Latch for IKEA HEJNE Printer Enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Developped for IKEA HEJNE, but it can be used for any custom built printer enclosure door. Magnetic snap function!

Ocena
0 / 5
Polubienia
8
Pobrania
22
Wydruki
0
Wyświetlenia
565
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

To protect my printer from dust, I built an enclosure into my Ikea Hejne shelf. 

This latch holds the PMMA glass door shut using magnets.

DoorStop part holds two Ø5 x 5 mm magnets. You can adjust the holding force by stacking multiple magnets or by changing their axial position. 

The GripPlate part holds a M5 bolt and a nut. The bolt head engages with the magnets with a nice clicking sound if adjusted properly. 

DoorStopClamp part is needed to clamp the magnets using two M4 x 16 bolts and nuts.

DoorStopCover is just to make a nice appearance on the wooden frame of the shelf, might be omitted. 

To be used with 96 mm handle. I had mine laying arround, I believe it was also from IKEA.

If you want to print out a handle, you could use one of those: https://www.printables.com/social/347025-dozdoz/collections/303344 (I did not test any)

I printed all in PETG. Supports are needed for the DoorStop part. Alternatively, you try orienting it sideways to omit supports - came to my mind after printing.

Tagi