1 / 8
Magnetic Door Latch for IKEA HEJNE Printer Enclosure — image 1
1 / 8

Magnetic Door Latch for IKEA HEJNE Printer Enclosure

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Developped for IKEA HEJNE, but it can be used for any custom built printer enclosure door. Magnetic snap function!

Rating
0 / 5
Likes
8
Downloads
22
Makes
0
Views
565
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

To protect my printer from dust, I built an enclosure into my Ikea Hejne shelf. 

This latch holds the PMMA glass door shut using magnets.

DoorStop part holds two Ø5 x 5 mm magnets. You can adjust the holding force by stacking multiple magnets or by changing their axial position. 

The GripPlate part holds a M5 bolt and a nut. The bolt head engages with the magnets with a nice clicking sound if adjusted properly. 

DoorStopClamp part is needed to clamp the magnets using two M4 x 16 bolts and nuts.

DoorStopCover is just to make a nice appearance on the wooden frame of the shelf, might be omitted. 

To be used with 96 mm handle. I had mine laying arround, I believe it was also from IKEA.

If you want to print out a handle, you could use one of those: https://www.printables.com/social/347025-dozdoz/collections/303344 (I did not test any)

I printed all in PETG. Supports are needed for the DoorStop part. Alternatively, you try orienting it sideways to omit supports - came to my mind after printing.

Tags