8040 Profile Holder for SHH Shifter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two-part holder for SHH Shifter for the included hardware and m3s.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 1028
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
I needed to mount my SHH Shifter to my rig. Didn't order the bottom mount, as I wanted to place it square onto an 8040 profile.
Created this handy little holders here. Printed 2, made them strong by using PETG and going ~4 perimeters, 25% infill.
I'm using these T-Nuts https://www.printables.com/model/217606-4040-m3-t-nut for the M3 through holes and 4 M3x16 screws to mount it.
Be advised: I've added a 0.2mm layer in the M4 holes of for the SHH Shifter mounting. This is to avoid supports and still being able to print it with the fillet on top. Just poke through them with a screwdriver or scissor.