Engine block card holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There are a few versions of this on thingiverse. This one is repaired, corrected, error free and printable.
- Ocena
- 5 / 5
- Polubienia
- 129
- Pobrania
- 1238
- Wydruki
- 18
- Wyświetlenia
- 4159
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There are a number of these on thingiverse. All have issues. It might be over 10,000 open edges, hundreds of errors, massive size, un-slicable or take hours to size but is missing areas. All model missing water jackets on 2 cylinders. I re did the model and put in the missing water jackets. NO errors or open edges and now slices as it should by all slicers as well about 1/4 the size.
It prints without support.
prints well in .3 but of course looks nicer in a lower res
detect thin walls suggested
A brim is not required