HingeBox Printable As An Assembled Unit Without Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here's a printed-assembled hinged box. It is really a test/demo of a new hinge library I've been building using an…
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 228
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Here's a printed-assembled hinged box.
It is really a test/demo of a new hinge library I've been building using an improved "unit hinge" similar to my thing 83033. I'll be releasing the OpenSCAD/Customizer library to make hinges shortly, but since there has been a lot of activity on thing 83033 lately, I figured I should let folks know what's coming....
Instructions
This should be a straightforward print using PLA extruded 0.3mm or finer. This STL file uses a 0.3mm gap between parts that shouldn't be connected, but that's actually a parameter in the OpenSCAD library this demonstrates.... The only aspect that doesn't necessarily print well is the little post used to keep the box closed; it's so small that the extruded filament tends to slosh around a bit, deforming it enough so that you might need to do a little filing to clean it up.
Category: Parts