HingeBox Printable As An Assembled Unit Without Supports
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here's a printed-assembled hinged box. It is really a test/demo of a new hinge library I've been building using an…
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 49
- Makes
- 1
- Views
- 228
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Here's a printed-assembled hinged box.
It is really a test/demo of a new hinge library I've been building using an improved "unit hinge" similar to my thing 83033. I'll be releasing the OpenSCAD/Customizer library to make hinges shortly, but since there has been a lot of activity on thing 83033 lately, I figured I should let folks know what's coming....
Instructions
This should be a straightforward print using PLA extruded 0.3mm or finer. This STL file uses a 0.3mm gap between parts that shouldn't be connected, but that's actually a parameter in the OpenSCAD library this demonstrates.... The only aspect that doesn't necessarily print well is the little post used to keep the box closed; it's so small that the extruded filament tends to slosh around a bit, deforming it enough so that you might need to do a little filing to clean it up.
Category: Parts