1 / 2
Filament Guide for Lack Enclosure — zdjęcie 1
1 / 2

Filament Guide for Lack Enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Model based on the filament guide for the new Prusa enclosure, designed to be used in the Ikea Lack enclosure.

Ocena
5 / 5
Polubienia
28
Pobrania
113
Wydruki
8
Wyświetlenia
1259
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

Model based on the filament guide for the new Prusa enclosure, designed to be used in the Ikea Lack enclosure, with the filament spool inside the box.

The concept is very similar to that of the Prusa enclosure, with the filament spool inside the box, the spool holder I've designed, to just place the roll inside the box, you can find it here.

You will need:

  • 4x M3x8 screw
  • 4x M3n nut
  • 2x 22mm wood screw (I've used a few dry wall screws and worked perfectly)
  • 1x PTFE tube 2.5x4x650 mm

I'm still working on my Lack enclosure, finishing building custom parts for various functions, such as an accessory for the led light diffuser and VOC filter.

I've printed the parts ok PETG, the same configuration for printing as Prusa use on most parts.

Tagi