Filament Guide for Lack Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model based on the filament guide for the new Prusa enclosure, designed to be used in the Ikea Lack enclosure.
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 113
- Makes
- 8
- Views
- 1,259
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Model based on the filament guide for the new Prusa enclosure, designed to be used in the Ikea Lack enclosure, with the filament spool inside the box.
The concept is very similar to that of the Prusa enclosure, with the filament spool inside the box, the spool holder I've designed, to just place the roll inside the box, you can find it here.
You will need:
- 4x M3x8 screw
- 4x M3n nut
- 2x 22mm wood screw (I've used a few dry wall screws and worked perfectly)
- 1x PTFE tube 2.5x4x650 mm
I'm still working on my Lack enclosure, finishing building custom parts for various functions, such as an accessory for the led light diffuser and VOC filter.
I've printed the parts ok PETG, the same configuration for printing as Prusa use on most parts.