1 / 2
Espresso tamper 51 mm / hollow to be molded — zdjęcie 1
1 / 2

Espresso tamper 51 mm / hollow to be molded

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed to become a solid tamper; 2 pieces, bottom hollow to be filled with plaster or similar

Ocena
0 / 5
Polubienia
4
Pobrania
59
Wydruki
0
Wyświetlenia
577
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

Bottom is hollow with 3.2mm walls (results in 100% plastic with 4 perimeters and a 0.4mm nozzle).

I filled the bottom with plaster, you could use concrete, sand, metal balls,… to make it hard and heavy.

Top cover is press fit; I secured it with super glue to make it water tight.

Use at own risk regarding food safety of the filament you use or regarding shattering if used with unreasonable force ;-)

Tagi