1 / 2
Espresso tamper 51 mm / hollow to be molded
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to become a solid tamper; 2 pieces, bottom hollow to be filled with plaster or similar
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 59
- Makes
- 0
- Views
- 579
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Bottom is hollow with 3.2mm walls (results in 100% plastic with 4 perimeters and a 0.4mm nozzle).
I filled the bottom with plaster, you could use concrete, sand, metal balls,… to make it hard and heavy.
Top cover is press fit; I secured it with super glue to make it water tight.
Use at own risk regarding food safety of the filament you use or regarding shattering if used with unreasonable force ;-)