Phone holder for pegboard or desktop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable 3D printed phone holder for pegboard or desktop
- Ocena
- 5 / 5
- Polubienia
- 310
- Pobrania
- 474
- Wydruki
- 4
- Wyświetlenia
- 5073
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
Adjustable 3D printed phone stand for pegboard or desktop. The angle is adjustable with a worm gear, which has enough friction to hold it in a desired place. On pegboard it can be rotated around vertical axis. With two M3 countersunk bolts, it can be used as a desktop version too.
https://youtube.com/shorts/UPk_453-xCY
I am using it to have good view angle from different locations in my workshop (see the video). This is redesigned, more universal version.
Two types of hooks are available:
- for 6x6mm hole metal plate (10)(11) - visible on images and video
- for IKEA Skadis board (12)(13) - I don't have Skadis, can't test it, feedback is welcome
About 3D printing:
- Most critical is the worm gear (1), print it in vertical position. Using a smaller layer height will result nicer overhangs. If the adhesion to the print bed is not great, use brim and glue stick or hair spray. I printed it with 0.15mm layer height.
- I printed everything else with 0.2mm layer height and with 3 walls and 20% infill. Supports are not required for any of the part.
- From hardware you will need 8 pcs M3x12 (10-15mm) bolts. For desktop version 2 pcs countersunk M3x(6-10mm) bolts.
The distance between hooks is adjustable and in design stiffening bracket is added, use M3 washer too (in video the bracket is not visible, it was added later)