1 / 1
Felco 600/10 Toggle for Felco 600 folding saw
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Toggle/rocker switch for Felco 600 Folding saw.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I broke the rocker toggle on my favourite folding saw. Couldn't find it easily so I just modelled my own.
Print with supports flat side to the bed (open side up). I recommend PLA+ or PETG. The only weak point is where the spring sits, and I suspect it might be stronger if you print it on an angle. Mine has held up just fine and I flick the blade out so it's holding up to the abuse (I use it nearly daily for the past 4 weeks).
Printed:
Layer Height: .2mm
Supports: On
Filament: Matter3D Performance Black