1 / 7

100mm magnetic vacuum hose connector

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Max

@Ostat

100mm magnetic vacuum hose connector, all common sizes, 0, 30, 45 and 90 deg bends.

Ocena: 5 / 5
Polubienia: 165
Pobrania: 870
Wydruki: 4
Wyświetlenia: 4830
Oceny: 5

Aktualizacja u źródła: 27 lis 2023

Informacje o modelu

Źródło: Printables
Kategoria: Tools
Licencja: Creative Commons — Attribution — Noncommercial

Szczegóły Pliki (192)Wydruki i komentarze (Wydruki: 4) (Komentarze: 23)Remiksy (2)Kolekcje (292)

100mm magnetic connector for all common hose sizes (that I could find online).

All adapters have:

Magnetic connector
- 100mm internal diameter
- Positions for 12 magnets, 10x3mm in size (magnet recess is 10.5x4mm).
- 3mm clearance around the magnets.
- 7.5mm flange thickness
Hose connector
- Each size has an option of Outer Diameter measurement or Inner Diameter.
  - Outer Diameter (OD): Intended for the printed connector to go inside your existing hose.
  - Inner Diameter (ID): Intended for the printed tube to go over your existing connector.
- Sizes are for the inside of the hose (outside of the adapter)
- 40mm long connector at each end
  - ID has short option that is 20mm
- 3mm taper on each connector, from -1.5 to +1.5
- Wall thickness of 2mm

Also generated are:

These were generated to make it easier to consume, if they don't suit however you can use the Parametric model to customise your own, or let me know and I can generate it.

Project homepage https://github.com/ostat/vacuum-hose-adapter-openscad

2023-07-15

Updated to version 2 of the model, should be compatible with version 1.
Added internal diameter (ID) measurements for putting the adapter over a hose connector on a tool.
Added short connector for ID, prevent it from bottoming out.
Added caps, to close off or dock the adapter

Tagi

vacuum vacuumadapter magentic