1 / 2
IKEA IVAR Foot Shoe Cup — zdjęcie 1
1 / 2

IKEA IVAR Foot Shoe Cup

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Snug-fit foot for Ivar Shelf System

Ocena
5 / 5
Polubienia
16
Pobrania
121
Wydruki
1
Wyświetlenia
767
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I modified Hanes244's model to serve soley as a protective cap for the base of my Ikea Ivar Shelf feet.

Compared to the original model, I made it shorter and added interior ribs so it fits snug on the leg.  I also added beveled channels in the interior base of the foot.  This reduces the change in print time between the floor and wall-only layer and helps prevent horizonal banding.

I tested the model on several of the Ikea Ivar samples I have in my basement, collected over several years and several states.  It fit well on all of them.  Also, please note that it may be very difficult to remove.  It is best to do a test fit on a leg that isn't part of an assembled Ivar shelf set.

I printed in ABS with solid walls and five solid bottom layers.  There is very little infill in this model.  I used 45% because it's going to have the full weight of whatever is on the shelves and I don't want them to deform.

Tagi