Protective visor (face shield) for health proffesionals fighting Coronavirus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of 3DVerkstan Protective Visor ( https://3dverkstan.se/protective-visor/ ).
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 63
- Wydruki
- 1
- Wyświetlenia
- 570
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution
This is a remix of 3DVerkstan Protective Visor (
https://3dverkstan.se/protective-visor/
). The original one requires eight holes to be laser cut on the transparent film. My version uses only four, and they can be made using a regular hole punch set at 5.5 cm.
Requirements:
- A 8.5" x 11" transparent sheet (the ones used with old overhead projectors)
- A two-holes hole punch (picture included).
Print instructions
No. perimeters: 50 (somthing high)
Infill: 100%
this will make sure everything is printed with perimeters, which will make the print faster and stronger.
You can print two parts at the same part in a Prusa i3 printer if you are smart positioning them. A Prusa Slicer project file is included, as well as an STL with two parts arranged to fit in a Prusa i3 printer and other similarly sized printers.