Protective visor (face shield) for health proffesionals fighting Coronavirus
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of 3DVerkstan Protective Visor ( https://3dverkstan.se/protective-visor/ ).
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 63
- Makes
- 1
- Views
- 570
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution
This is a remix of 3DVerkstan Protective Visor (
https://3dverkstan.se/protective-visor/
). The original one requires eight holes to be laser cut on the transparent film. My version uses only four, and they can be made using a regular hole punch set at 5.5 cm.
Requirements:
- A 8.5" x 11" transparent sheet (the ones used with old overhead projectors)
- A two-holes hole punch (picture included).
Print instructions
No. perimeters: 50 (somthing high)
Infill: 100%
this will make sure everything is printed with perimeters, which will make the print faster and stronger.
You can print two parts at the same part in a Prusa i3 printer if you are smart positioning them. A Prusa Slicer project file is included, as well as an STL with two parts arranged to fit in a Prusa i3 printer and other similarly sized printers.