PS3Eye Camera Monitor Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Monitor Mounted Clip to hold the PS3 Eye Camera.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 248
- Wydruki
- 1
- Wyświetlenia
- 864
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
This part is designed to replace and improve upon the TrackHat (V1) camera mount for the PS3 Eye Camera. It holds the camera reliably on top of a computer monitor. Supports are built-in; simply cut them off with snips or a utility knife. I added two strips of self-adhesive silicone where the clip contacts the monitor, to prevent any sliding. This is not necessary, but definitely a quality of life improvement.
The dimensions of the silicone strip are (44 * 7 * 2 mm) L*W*H. Link to the self-adhesive silicone sheet (2mm) that I used: https://www.amazon.de/gp/product/B071CGN92T/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Files and Hardware:
I designed this part with a 0.6 mm nozzle in mind, but others will do the job fine. Please just be sure to slice the model yourself, if you are not using a 0.6 mm nozzle and PLA. Otherwise these are standard Prusa Slicer settings. The geometry file format is STEP for easy modification.
Printing:
All parts print great with the standard Prusa Slicer “0.20 mm QUALITY” profile settings and no supports!
Nozzle: 0.6 mm
Layer Height: 0.2 mm
Supports: None
Perimeters: 3
Infill: 15%