PS3Eye Camera Monitor Mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.48 – €1.81 net (excluding VAT)
For file: 20220926_PS3Eye_Monitor_Mount_0.6n_0.2mm_PLA_MK3S_1h40m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.64 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 1.67 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A Monitor Mounted Clip to hold the PS3 Eye Camera.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 248
- Makes
- 1
- Views
- 864
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
This part is designed to replace and improve upon the TrackHat (V1) camera mount for the PS3 Eye Camera. It holds the camera reliably on top of a computer monitor. Supports are built-in; simply cut them off with snips or a utility knife. I added two strips of self-adhesive silicone where the clip contacts the monitor, to prevent any sliding. This is not necessary, but definitely a quality of life improvement.
The dimensions of the silicone strip are (44 * 7 * 2 mm) L*W*H. Link to the self-adhesive silicone sheet (2mm) that I used: https://www.amazon.de/gp/product/B071CGN92T/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Files and Hardware:
I designed this part with a 0.6 mm nozzle in mind, but others will do the job fine. Please just be sure to slice the model yourself, if you are not using a 0.6 mm nozzle and PLA. Otherwise these are standard Prusa Slicer settings. The geometry file format is STEP for easy modification.
Printing:
All parts print great with the standard Prusa Slicer “0.20 mm QUALITY” profile settings and no supports!
Nozzle: 0.6 mm
Layer Height: 0.2 mm
Supports: None
Perimeters: 3
Infill: 15%