28 models
This is a simple, yet versatile TrackIR mount for DIY projects. I couldn't find a trackIR mount I liked, so I decided to make my own. There should be enough space inside to accommodate all the electronics (Cables and resistances) needed…
A simple DIY LED holder for head tracking, designed for 5mm LEDs. The first iteration (pictured) was designed with the option to mount LEDs on Dupont connectors so that they could be easily replaced. This, however, proved troublesome to…
Just added horizontal rectangles at the end of the arc. It increases the stability and the comfort while wearing the band. Other than that, the model is exactly as created by alan1for ( https://www.thingiverse.com/alan1for/about ), btw he…
Simple mount for any handmade or improvised filter for your PS3 Eye camera. Simply glue or just place the filter on the squared piece, and cover it with the other one. This was originally designed to install a filter using a floppy disk…
This is a simple DIY freetrack/ trackIr headset. It is made to use an action cam battery, mine is 33x30 mm from a cheap action cam and 5mm ir leds. The battery connector was bought in aliexpress:…
The Stock Mount for the TrackIR is not the best and doesnt work well on Monitors that are not Square shaped. i use Myself a Samsung G7 and the included mount just slips around and is overall annoying to place. Introducing this Mount, it…
I got tired of my TrackIR reflector (which was made for mounting to hats) popping off of my headphones. Now it only comes off when I want it to. Designed with OnShape . Original CAD available here .
This is a minimalist TrackIR holder which ensures the right (default) distances between the IR-leds.
Printed on CR10V3 with Eryone black PLA. Nozzle at 195 and bed at 55.
With the addition of 2 x CR2016 3v Batteries Paperclip (or 1.25mm wire) for battery contacts Micro toggle switch 4 x spectacle size screws you can get rid the USB lead for power and run cableless. (Some additional small lengths of wire…
TrackIR arm that mounts under the VESA100 screws. The sensor mounts magnetically to the arm like the original stand. There are short and long arm pieces to customize the arm length. Additional hardware requirements: -M5x30 bolts and nuts…
A snap-on brace for the twisting joint of a TrackIR 5 TrackClip Pro antler. I printed this with PLA, 0.4mm nozzle and 0.15mm layer height. The snap-on profiles on this tiny piece require accuracy to work properly, so try to use the most…
NOTICE: It is not allowed to print and sell this design on eBay (or anywhere else). It does not matter if you change the design. Please read licence information. I needed a better LED holder so I made my own. To clarify this design works…
With the addition of; 2 x CR2016 3v Batteries, A paperclip (or 1.25mm wire) for battery contacts Micro toggle switch 4 x spectacle size screws you can get rid the USB lead for power and run cableless. (Some additional small lengths of…
Please note this is for the TrackIRClip version that opens in the back so it can slide into the slot, refer to pictures Fusion360 file is available for customization
DIY TrackIR / OpenTrack clip for IR LED head tracking. Requires some soldering and additional components. separate LED holders (middle one a little smaller for no practical reason) main body sandwich design - glue it or hold it together…
This is a remix of fasteddys “hinged privacy shutter for a Logitech C615 webcam” to fit on the TrackIR cam/sensor. I made this, since I never really found out what the TrackIR cam can really see or not. It may not be capable of a full…
Pieces to allow permanent mounting of TrackIR reflector to a baseball cap with a couple of screws. Category: Video Games
Detachable wireless TrackIR clip for Crosair HS80 headphones. I uploaded adapter as Fusion360 (.f3d) file if you want t
This is a simple DIY freetrack/ trackIr headset. It is made to use an action cam battery, mine is 33x30 mm from a cheap action cam and 5mm ir leds. The battery connector was bought in aliexpress:…
TrackIR (https://www.trackir.com) is a beloved 'Head Tracking System' for Gamings. TrackIR 5 was used for this 3D Model. This 3D Print allows to keep permanently the main sensor against the wall in front of you (behind your screen).…
Bought a simple 1100mah lithium battery through amazon or just google LP603449 battery size was 34.5mm x 51mm x6,3 you also need 4 m3 bolts you probably need to change polarity from the battery but that's easy just change the red and…
A custom TrackIR 5 enclosure with mount for a 49' Sony TV. A Fusion 360 project is included so you can adapt the base to the required angle and mounting. Uses two M3 inserts to hold the enclosure. Enjoy!
This is a remix of a model by: Nickie Deuxyeux Included STEP file so that the hinge can be modified for your purposes. The STEP file does not include the original enclosure mesh. Please import that separately. The STL has the enclosure…
This thing is a fan mount to cool off a TrackIR 4 sensor. These units get very hot, they're barely touchable where the processor is after they've been on a while. I've lost one unit already (probably to heat) and now that it's out of…
Since monitors became very flat, the standard TrackIR mount doesn't hold the IR camera very good. So, I made a bracket, which is able to give the standard TrackIR mount a proper grip. It should fit for most monitors. I optimized the model…
Designed this to mount a TrackIR to an 8020 aluminum profile rig for sim racing. Place the sensor upside down in the holder and invert the settings 180 degrees in the TrackIR software for it to track properly. Uses M4 hardware to attach…
Replacement clamp for the wireless TrackIR clip. (Also known as TrackNP) Nothing fancy, but it can be tricky to put the spring back in. I used two pins with one pushing the other out to help with the spring.
