Rollerball Pen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thread is working and running smooth. The cap is also working. Note that the parts are printed in medium to high…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 504
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Thread is working and running smooth. The cap is also working. Note that the parts are printed in medium to high quality. Maybe you have to make some adjustmets in the autodesk files to make it working with low quality.
This pen is designed for the following ball pen refill: (Pilot G2 refill)
but probably all rollerball refills are working, try it and give feedback! :)
Print Settings
Printer Brand:
FlashForge
Printer:
Finder
Rafts:
Yes
Supports:
Yes
Resolution:
Hyper
Infill:
15%
Notes:
printing vertically, both body parts with the thread at the top. To print the lower part of the pen you'll need some supports and a brim to connect it with the ground. The cap is printed with the flat side to the ground
How I Designed This
This was my first Inventor project, maybe the files are corrupt or some design steps are useless, please give feedback
Category: Office