1 / 3
Turn Signal Cover for BMW R1200GS 2017 (K50) — zdjęcie 1
1 / 3

Turn Signal Cover for BMW R1200GS 2017 (K50)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Turn Signal Cover replacement

Ocena
0 / 5
Polubienia
3
Pobrania
56
Wydruki
0
Wyświetlenia
671
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

This model is not associated to BMW and is meant to be a temporal replacement while the original (if exists) is found. Unfortunately it seems that left control for the motorcycle is sold as a whole, and the turn signal cover cannot be purchased separately, hence I designed this replacement part.

I designed this part using an original part as a guide to ensure best fitment and tested on a real motorcycle.

I printed the final version in ASA although you could use ABS or another material intended for exterior use.

Print Instructions:

I printed this in the side, with supports, since ASA tend to have “poor” layer adhesion (it might be my fault) although this also ensures better mechanical strength in the tabs that connect to the motorcycle.

  • Layer Height: 0.3mm
  • Layer Width: 0.4mm (larger might affect tabs precision)
  • Hot End Temp: 250 C
  • Bed Temp: 70 C
  • Supports: Yes

Tagi