DIY Enclosure LACK Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raise the height of the LACK enclosures
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 160
- Wydruki
- 1
- Wyświetlenia
- 1217
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
If you're like me, you made the DIY Prusa enclosure with the IKEA LACK tables (link here)
However, I found that the LACK tables are too short and I can't easily troubleshoot my printer without sitting on the ground, and I don't want the added instability of stacking another LACK table underneath.
BOOM - introducing these LACK risers. Print 4 of these bad boys and they will raise your table up to a standard bedside table height (~21 inches). Each one takes 1x #10 (3/16) wood screw and I'd recommend a pan head since there's no countersink in the model. Use pilot holes! The link to the ones I used is here, or just get them at home depot. Theoretically, the screw is optional.
The image shows the Prusa printer on a standard bedside table, and the LACK table with the risers in front of it, comes out to the same height.
Enjoy!
Edit: included a .3mf that prints all 4 (PLA) and g-codes for both!