DIY Enclosure LACK Riser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raise the height of the LACK enclosures
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 160
- Makes
- 1
- Views
- 1,217
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
If you're like me, you made the DIY Prusa enclosure with the IKEA LACK tables (link here)
However, I found that the LACK tables are too short and I can't easily troubleshoot my printer without sitting on the ground, and I don't want the added instability of stacking another LACK table underneath.
BOOM - introducing these LACK risers. Print 4 of these bad boys and they will raise your table up to a standard bedside table height (~21 inches). Each one takes 1x #10 (3/16) wood screw and I'd recommend a pan head since there's no countersink in the model. Use pilot holes! The link to the ones I used is here, or just get them at home depot. Theoretically, the screw is optional.
The image shows the Prusa printer on a standard bedside table, and the LACK table with the risers in front of it, comes out to the same height.
Enjoy!
Edit: included a .3mf that prints all 4 (PLA) and g-codes for both!