1 / 10
Anderson style (SB50) 50 amp connector housing — zdjęcie 1
1 / 10

Anderson style (SB50) 50 amp connector housing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

2,78 € – 3,40 € netto (bez VAT)

Dla pliku: SB50 Flush Mount v18_0.25mm_PETG_MK3S_3h7m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 3,09 € netto (środek widełek).

Masa podana przez autora
41 g
Czas druku podany przez autora
3,11 godz.
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

I created these parts to mount an Anderson Power style (SB50) 50 amp connector on the side of a battery box build.

Ocena
5 / 5
Polubienia
112
Pobrania
1502
Wydruki
5
Wyświetlenia
4503
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I created these parts to mount an Anderson Power style (SB50) 50 amp connector on the side of a battery box build. It is comprised of two components, the base plate and the top cover to house the SB50 plug. The components feature a small channel around one of the mounting holes to capture a small cable of a dust cover and the top cover form fits to the SB50 connector.

For the final components I used PETG but it prints just as well in PLA.

The cover component is best printed in an upright position using a skirt of 3-5mm for additional stability while printing. This orientation does not require any additional support.

See Also:
NEW Dual Anderson Power style SB50 connector

Tagi