Dispenser for Smarties Mini
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dispenser for Smarties Mini.
- Ocena
- 0 / 5
- Polubienia
- 39
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 1105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After the 10th box of smarties had opened in my pocket, spilling all the contents, I decided to try my luck with 3D printing. Meet the “Dispenser for Smarties Mini” (I know, the name is the wrong way around for copyright or some legal reasons… )
The dispenser works quite well but might need a shake every now and then if the Smarties gets stuck in there. I no longer have smarties melted in my pockets, and can covertly make 1 piece of smarties appear by using only 1 hand 😊
You are free to remix the model, but I would rather make improvements myself so I can continue to learn. So if you have comments or constructive feedback please post me a comment :-)
HARDWARE needed:
- 1x Ballpoint pen spring. Must be long enoug for the slide to be pushed back into the idle position. See video below.
For assembly, use and print-instructions, please see video:
Peace be with you all <3