Ender 3 "Bullseye" CR Touch Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the original Ender 3 Bullseye BL Touch mount specifically for the CR Touch. Cutout for the cabling…
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 212
- Wydruki
- 0
- Wyświetlenia
- 1699
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a remix of the original Ender 3 Bullseye BL Touch mount specifically for the CR Touch.
Cutout for the cabling was added.
All credit for the original goes to https://www.thingiverse.com/thing:2759439
You need to mount the bracket first.
You will need
2 x 18mm (ish) m3 bolts
4 x m3 nuts
2 x m3 lock washers
Fit the bolts through the CR Touch and lock on with a nut on each.
Slot the bolts into the mount, add a lock washer on each, then lock on with a nut on each.
The middle nuts are to lower the CR Touch down as it's not as long as the BL Touch
See photo for final assembly.
Offsets are X-48 Y-10
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.16
Infill:
60%
Filament: Any PLA User Choice
Category: 3D Printer Parts