Leatherman Surge Quick release Holster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Geometry completely redesigned to accommodate the latest Leatherman Surge utilizing effortless retention.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 257
- Wydruki
- 1
- Wyświetlenia
- 2760
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Geometry completely redesigned to accommodate the latest Leatherman Surge utilizing effortless retention. The tool slips in under its own weight and is held in place securely. Can be pulled out quickly and easily by pulling it up through the finger slot. Makes a nice audible click when it goes in. I have included 4 variations:
- Surge Holster for a 1.75" wide riggers belt.
- Surge Holster for a 1.75" wide riggers belt with Anker LC40
flashlight holder - Surge Holster for regular belt.
- Surge Holster for a 1.75" wide riggers belt with Convoy Flashlight
Should be printed vertically. You can print just up to the detent catches to check fitment and see if you need to enlarge. That's about 1.8 inches (46mm) up from the bottom.
Here is a video of it in action!
Print instructions
Print standing up vertical. PLA holds up well and will be dimensionally correct. PETG may come in a tiny bit shrunk. The surge should slide in effortlessly. If it is tight, it needs to be printed larger. Please see the youtube video.
Do you like my models? Consider buying me a coffee ;-)