1 / 5
FX Airguns Dreamline trigger lock | FX Airguns Dreamline Abzugssperre — zdjęcie 1
1 / 5

FX Airguns Dreamline trigger lock | FX Airguns Dreamline Abzugssperre

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

0,34 € – 0,42 € netto (bez VAT)

Dla pliku: FX Dreamline Trigger Lock_0.2mm_PETG_MK3S_28m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,38 € netto (środek widełek).

Masa podana przez autora
3 g
Czas druku podany przez autora
28,2 min
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

This is a trigger lock to prevent unauthorized use of an FX Dreamline pcp air rifle. | FX Dreamline Abzugsschloss.

Ocena
0 / 5
Polubienia
17
Pobrania
105
Wydruki
0
Wyświetlenia
1108
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a trigger lock to prevent unauthorized use of an FX Dreamline pcp air rifle.

Simply print in STL orientation at 0.2 layer height and 25% infill with no support, attach a padlock and lock.

The trigger lock will work with any padlock with a maximum shackle diameter of 7mm, and the straight portion of the shackle should be 18-20mm long when locked. Longer shackles are not recommended, otherwise the lock could be pushed out.

— I would be very happy if you have as much fun with the things as I do. — 

 If you like :-) Thank you very much!

— German desription — 

Das ist ein Abzugsschloss, um die unbefugte Benutzung eines FX Dreamline Pressluftgewehrs zu verhindern.

Einfach in STL Ausrichtung in 0.2 Schichthöhe und mit 25% Infill ohne Support ausdrucken, ein Vorhängeschloss anbringen und abschließen.

Die Abzugsperre funktioniert mit jedem  Vorhängeschloss mit maximal 7mm Bügeldurchmesser, wobei der gerade Teil des Bügels im verschlossenen Zustand 18-20 mm Länge haben sollte. Längere Bügel sind nicht empfehlenswert, da die Sperre sonst herausgeschoben werden könnte.

Tagi