1 / 4
Bike - Mountain Bike Fork AirTag Holder (TPU) — zdjęcie 1
1 / 4

Bike - Mountain Bike Fork AirTag Holder (TPU)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Apple AirTag holder that fits into the bottom of a mountain bike fork steerer tube.

Ocena
5 / 5
Polubienia
155
Pobrania
1056
Wydruki
9
Wyświetlenia
6219
Oceny
8

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Mount an Apple AirTag into a round 32-34mm steerer opening.

I only recommend using TPU, and have only personally used 95A TPU.  

 

Forks

Tested the fit on the below forks.  It may fit other makes/model/years, but I would suggest measuring the opening and confirming the opening is circular.

Supported

Unsupported

Have a OneUp Components EDC tool in your steerer tube, too?  I got you!

 

Installation

1.Press AirTag into holder

2.Press holder up into fork steerer

Recommended Print Settings

  • TPU 95A
  • .15mm layer height
  • NO supports needed

Updates

11/17/2023 - Added an adapter that works with this model for the OneUp Components EDC tool that is installed in a steerer tube.

10/01/2023 - Updated model origin to be “Original model - I made it”.  I was inspired by this design and others, but ended up this entirely modeling the design from scratch.  Changing the material to TPU meant the entire tolerances and design needed to change, so I don't think I was correct originally when I made this a “remix”.

08/23/2023 - Almost 1 year in and I have literally forgot these were installed.  On 3 bikes in our apartment and still holding tight!

10/26/2022 - I have ridden 100's of miles across road, gravel, hardpack, chunk, and some sketchy jumps and the holder is still in place in my 2022 fox 34 fork.
 

Tagi