Front Bumper for Kyosho Mini-Z AWD Subaru Impreza WRC RC car (1:24)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kyosho Mini-Z RC cars are very detailed, precise (and a bit expensive).
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 206
- Wydruki
- 1
- Wyświetlenia
- 3019
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Kyosho Mini-Z RC cars are very detailed, precise (and a bit expensive). If you don't want to scratch or crack the front bumper of the body shell, for example during practice rides or wild races, there is a chance to print yourself light bumper and mount it to the holes available on chassis already. (You need two small screws.)
Notes:
• The front bumper is designed for Subaru Impreza WRC 2008 AWD RC car, maybe it can fit to other drifting sport cars of Mini-Z family.
• I recommend Nylon or CPE. – At least something more impact resistant than PLA.
More photos of the RC car on my Instagram channel.
Print instructions
The printing is very easy. If you want to, support two small holes from the build plate. Or clean them after print as screws (I used inbus ones) need to hide heads.
The 3D printed model should fit precisely on the chassis – just click it on the place (and use both screws to secure it for the ride).