1 / 4
Cylinder Manipulation Tools for 4040 T-Slot Plate (Rotator, Dispenser) — zdjęcie 1
1 / 4

Cylinder Manipulation Tools for 4040 T-Slot Plate (Rotator, Dispenser)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Made for robotics education, these tools provide multiple ways for interacting with cylinders easily.

Ocena
0 / 5
Polubienia
1
Pobrania
36
Wydruki
0
Wyświetlenia
448
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Engineering
Licencja
Creative Commons — Attribution

These tools were primarily made for the FANUC Standard educational package and the original cylinders it came with, but will work with anything that uses the 4040 T-slot plate system.

The tools can be installed both ways horizontally, so with both in the same T-slot rail or in two neighboring ones.

I tried to make them as easy to print as possible, so no supports are needed, and as low-profile as possible, for the robot to be able to navigate between them easier.

Blender source files are also included, with the cutting done via boolean modifiers.

The cylinders themselves are 25mm in diameter, and 40mm in length. Fanuc supplied us with some in their kit, but we also made some ourselves from 25mm aluminium pipe cut to length and 2x 25mm pipe endstops. There is also a 3D printable STL available in the downloads.

The dispenser can fit around 6 cylinders at once, and it is easy to take them out using a robot thanks to it's low-profile design. The rotator can then be used rotate these cylinders in all directions. The robot's gripper can be 30mm wide at most for this to work.

For the other Fanuc parts that are visible on the pictures, visit https://www.thingiverse.com/thing:5413408

Made for BSZC Nemes Tihamér High-School on request

Print Settings

Printer Brand: Creality

Printer: Ender 5

Rafts: No

Supports:  No

Resolution: 0.12

Infill:  65+%

Filament: Creality PLA Black

Tagi