1 / 6
Sensor Holders for 4040 T-Slot Plate (18mm & 30mm) — zdjęcie 1
1 / 6

Sensor Holders for 4040 T-Slot Plate (18mm & 30mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A way to quickly install the standard 18mm and 30mm industrial sensor packages onto a 4040 T-Slot plate.

Ocena
0 / 5
Polubienia
8
Pobrania
51
Wydruki
0
Wyświetlenia
291
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

These sensor mounts were primarily made for the FANUC Standard educational package, so that additional sensors could be installed, but will work with anything that uses the 4040 T-slot plate system.

The holders can be installed both ways horizontally, so with both in the same T-slot rail or in two neighboring ones.

I tried to make them as easy to print as possible, so no supports are needed, and as low-profile as possible, for the robot to be able to navigate between them easier.

T-Nuts are required, but are easy to 3D print if needed.

Blender source files are also included, with the cutting done via boolean modifiers.

For the other Fanuc parts that are visible on the picture, visit https://www.thingiverse.com/thing:5413451

Made for BSZC Nemes Tihamér High-School on request

Print Settings

Printer Brand:

Creality

Printer: 

Ender 5

Rafts:

Doesn't Matter

Supports: 

No

Resolution:

0.12 for added stability

Infill: 

95+%

Filament: Prusament PETG Grey

 

 

 

Category: Electronics

Tagi