Simple Popper Mega XL AF Pro Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mountable Mega XL Dart Popper for Adventure Force Nexus Pro and Aeon Pro
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 386
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Introducing the Simple Popper Mega XL. Fire a single Mega XL dart from the end of a Nexus Pro or and Aeon Pro for maximum shield busting. Also features a pass through for regular darts. Not tested with any other blasters besides the Nexus Pro and Aeon Pro though it should fit barrel adapters with a 19mm ID.
The idea for this came to life when I found a bundle of Mega XL dart at a local thrift store but had no Mega XL blasters. But I do have the Nexus Pro and Aeon Pro and I know they have the ability to shoot Mega and Rival off the barrel. So a few minutes in SolidWorks and a few hours of printing and some PETG later, I had this thing.
- Print Helpers
- .2 layer height
- .42 line width
- orient part with shorter tube on the bed.
- supports around the tube.
It should print on the first go. I'll upload some pictures later as well as provide updates as they get made. I printed it just fine out of PETG on my Qidi X Plus though I did have to scale it to 102%. Not sure if due to material shrinkage or some other issue.