Lack USB Cable Passthrough for Ferrite beads *Updated*
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sealing plug for a Ikea Lack enclosure that allows a cable(s) to pass through to underside of enclosure.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 36
- Wydruki
- 1
- Wyświetlenia
- 884
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Updated model included to pass multiple cables and has a larger 9mm diameter. It's longer to ease installation and sticks through by about 10mm. The part now aligns to itself with a dovetail feature. The clearance on this feature is about 0.2 mm so that it'll have a slight interference and stay together with a friction fit.
The old design is a two piece plug to drill a hole a seal the cable in place. Part sticks out about 3 mm beyond the bottom of the Lack table surface. No glue required, held in place by hole and gravity. Included FreeCAD files to customize to different cables.
Preparation: Drill a hole using a bit larger than 14 mm, I used a 5/8" bit. I took my time, but still slipped and took a chunk out of the surface.
Print Instructions: Supports needed for floating ends of dovetail design, no supports needed for the old design.