Lack USB Cable Passthrough for Ferrite beads *Updated*
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sealing plug for a Ikea Lack enclosure that allows a cable(s) to pass through to underside of enclosure.
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 36
- Makes
- 1
- Views
- 884
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Updated model included to pass multiple cables and has a larger 9mm diameter. It's longer to ease installation and sticks through by about 10mm. The part now aligns to itself with a dovetail feature. The clearance on this feature is about 0.2 mm so that it'll have a slight interference and stay together with a friction fit.
The old design is a two piece plug to drill a hole a seal the cable in place. Part sticks out about 3 mm beyond the bottom of the Lack table surface. No glue required, held in place by hole and gravity. Included FreeCAD files to customize to different cables.
Preparation: Drill a hole using a bit larger than 14 mm, I used a 5/8" bit. I took my time, but still slipped and took a chunk out of the surface.
Print Instructions: Supports needed for floating ends of dovetail design, no supports needed for the old design.