Minimal Anycubic Kobra Filament Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed version of minimal filament guide - flipped to other side & solid/slit variants.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 128
- Wydruki
- 3
- Wyświetlenia
- 620
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Remixed version of JDBull's minimal filament guide. I wanted it closer to the spool (and center of the rail) so I mirrored it to other side. I also didn't quite like the slit in the original so I created a solid version as well as created a slit version that adjusted its angle to print a bit better. I also redid the filets in the hole for less friction/drag in both directions - extrusion and retraction.
Print 100% infill with fins facing up.
No supports necessary.
Install by unscrewing stock spool holder arm, placing this underneath (with fins facing down towards build plate), then screwing the arm back down on top of it.